Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this case, you will need to source some plastic spacers that will assist the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any shards will fall onto the fabric rather than on the floor where they could be trampled on and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional comes out and fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the distance between the window and the door is large, you might prefer a security screen that also includes a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from becoming worse.

To fix a sagging window repair near me you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure they stay in position.

If you can't reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close your window and do an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is essential to take action if awake each day to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most often, Upvc Window Repair window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the problem is, the old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them, and also that the sill pan is angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze it could be hinges at fault. These are easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It's very simple to change a window hinge but it's much easier if someone else helps hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused either by opening the window improperly or by a poor installation in the factory. Sending us a picture through our website can often solve the issue. We are more than happy to provide assistance.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again due to wear and tear can become misaligned, this will cause a gap to form between the sash and the frame. If they are damaged beyond repair, it may be required to realign them. In addition, the interlock could be unbalanced. This is located on the hinge side and may need to be cleaned. In certain instances it is possible to replace these.

The next most common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce the risk of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will provide an excellent level of security and insulation for your home. It is crucial to realize that all windows have a lifespan and they may reach an point at which it is more economical to replace them than fix them. So, if you are experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as you can.